Skip to content
Join the waitlist

Hoist Mechanic / Hoist Milwright

1911 Gold

Location
Bissett, Manitoba
Occupation
Industrial Mechanic (Millwright)
Pay
Not listed. The posting below may state it.
First seen by Werko
Sep 15, 2026
Last confirmed active at source
Nov 1, 2026
Werko will recheck by
Nov 3, 2026

About this job

Advertised pay

Only part of this posting could be checked. Check the source for the full terms.

    Required by this posting

    • Required Experience & Skill Set • Minimum 5 years of industrial maintenance experience

      Source wording
      Required Experience & Skill Set • Minimum 5 years of industrial maintenance experience

    • Ability to respond to emergency call-outs when required

      Source wording
      Ability to respond to emergency call-outs when required

    Preferred by this posting

    • Previous experience maintaining mine hoists or other critical lifting systems is preferred

      Source wording
      Previous experience maintaining mine hoists or other critical lifting systems is preferred

    • First Aid/CPR considered an asset

      Source wording
      First Aid/CPR considered an asset

    Mentioned in this posting

    • OPEN JOB POSTING August 2026 Hoist Mechanic / Hoist Milwright  Location: True North Mine, Bissett, Manitoba (Camp-Based)  Job Type: Full-Time  Company: 1911 Gold Corporation  Schedule: 14 Days On / 14 Days Off (Days & Nights)  Work Location Note: This position is based at the True North Mine site

      Source wording
      OPEN JOB POSTING August 2026 Hoist Mechanic / Hoist Milwright  Location: True North Mine, Bissett, Manitoba (Camp-Based)  Job Type: Full-Time  Company: 1911 Gold Corporation  Schedule: 14 Days On / 14 Days Off (Days & Nights)  Work Location Note: This position is based at the True North Mine site

    • Camp accommodations and meals are provided during scheduled work rotations

      Source wording
      Camp accommodations and meals are provided during scheduled work rotations

    • Position Overview 1911 Gold Corporation is seeking an experienced and safety-focused Hoist Mechanic / Hoist Millwright to support the inspection, maintenance, repair, testing, and reliability of mine hoisting systems and associated mechanical equipment at the True North Mine in Bissett, Manitoba

      Source wording
      Position Overview 1911 Gold Corporation is seeking an experienced and safety-focused Hoist Mechanic / Hoist Millwright to support the inspection, maintenance, repair, testing, and reliability of mine hoisting systems and associated mechanical equipment at the True North Mine in Bissett, Manitoba

    • The Hoist Mechanic / Hoist Millwright is responsible for ensuring hoist plants, conveyances, ropes, braking systems, safety devices, and supporting mechanical equipment are maintained in accordance with Manitoba's Operation of Mines Regulation (M

      Source wording
      The Hoist Mechanic / Hoist Millwright is responsible for ensuring hoist plants, conveyances, ropes, braking systems, safety devices, and supporting mechanical equipment are maintained in accordance with Manitoba's Operation of Mines Regulation (M

    • The successful candidate will work closely with Hoist Operators, Maintenance, Electrical, Engineering, Operations, and contractors to maximize equipment reliability and minimize operational downtime

      Source wording
      The successful candidate will work closely with Hoist Operators, Maintenance, Electrical, Engineering, Operations, and contractors to maximize equipment reliability and minimize operational downtime

    • Key Responsibilities Hoist Maintenance & Operations • Inspect, maintain, troubleshoot, repair, and overhaul mine hoists and associated mechanical systems

      Source wording
      Key Responsibilities Hoist Maintenance & Operations • Inspect, maintain, troubleshoot, repair, and overhaul mine hoists and associated mechanical systems

    • Perform preventative, predictive, and corrective maintenance on: Drum and friction hoists Braking systems Clutches and drives Gearboxes and couplings Headframes and sheaves Conveyances, including cages, skips, and counterweights Loading and dumping systems Rope attachments and guides Hydraulic and pneumatic systems • Complete scheduled inspections in accordance with site maintenance standards and regulatory requirements

      Source wording
      Perform preventative, predictive, and corrective maintenance on: Drum and friction hoists Braking systems Clutches and drives Gearboxes and couplings Headframes and sheaves Conveyances, including cages, skips, and counterweights Loading and dumping systems Rope attachments and guides Hydraulic and pneumatic systems • Complete scheduled inspections in accordance with site maintenance standards and regulatory requirements

    • Assist with annual hoist shutdowns, major rebuilds, equipment overhauls, and shaft rehabilitation projects

      Source wording
      Assist with annual hoist shutdowns, major rebuilds, equipment overhauls, and shaft rehabilitation projects

    • Perform operational equipment checks and identify developing mechanical issues before equipment failure occurs

      Source wording
      Perform operational equipment checks and identify developing mechanical issues before equipment failure occurs

    • Compressed Air & Pumping Systems • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations

      Source wording
      Compressed Air & Pumping Systems • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations

    • Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls

      Source wording
      Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls

    • Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Regulatory Compliance & Documentation • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations

      Source wording
      Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Regulatory Compliance & Documentation • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations

    • Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls

      Source wording
      Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls

    • Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Safety Systems • Inspect and test hoist braking systems, limit switches, overwind protection devices, emergency-stop systems, safety interlocks, and other critical safeguards

      Source wording
      Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Safety Systems • Inspect and test hoist braking systems, limit switches, overwind protection devices, emergency-stop systems, safety interlocks, and other critical safeguards

    • Verify the proper operation of shaft signalling equipment and mechanical safety systems

      Source wording
      Verify the proper operation of shaft signalling equipment and mechanical safety systems

    • Assist with equipment failure investigations and root-cause analyses involving hoisting and related mechanical systems

      Source wording
      Assist with equipment failure investigations and root-cause analyses involving hoisting and related mechanical systems

    • Follow all lockout/tagout and energy-isolation requirements during maintenance activities

      Source wording
      Follow all lockout/tagout and energy-isolation requirements during maintenance activities

    • Preventative Maintenance & Reliability • Follow and support established preventative and predictive maintenance programs

      Source wording
      Preventative Maintenance & Reliability • Follow and support established preventative and predictive maintenance programs

    • Monitor equipment condition and identify developing failures before breakdowns occur

      Source wording
      Monitor equipment condition and identify developing failures before breakdowns occur

    • Participate in equipment reliability and continuous-improvement initiatives

      Source wording
      Participate in equipment reliability and continuous-improvement initiatives

    • Recommend equipment upgrades and maintenance improvements to increase reliability and minimize operational downtime

      Source wording
      Recommend equipment upgrades and maintenance improvements to increase reliability and minimize operational downtime

    • Support equipment lifecycle and replacement planning

      Source wording
      Support equipment lifecycle and replacement planning

    • Assist with the development, review, and revision of preventative maintenance programs and procedures

      Source wording
      Assist with the development, review, and revision of preventative maintenance programs and procedures

    • Journeyperson Industrial Mechanic (Millwright), Interprovincial Red Seal Industrial Mechanic (Millwright), or an equivalent recognized mechanical trade qualification acceptable to 1911 Gold Corporation

      Source wording
      Journeyperson Industrial Mechanic (Millwright), Interprovincial Red Seal Industrial Mechanic (Millwright), or an equivalent recognized mechanical trade qualification acceptable to 1911 Gold Corporation

    • Previous underground mining experience is considered a strong asset

      Source wording
      Previous underground mining experience is considered a strong asset

    • Strong experience with hydraulic, pneumatic, and rotating equipment systems

      Source wording
      Strong experience with hydraulic, pneumatic, and rotating equipment systems

    • Experience with precision alignment, vibration management, bearings, gearboxes, and drivetrain maintenance

      Source wording
      Experience with precision alignment, vibration management, bearings, gearboxes, and drivetrain maintenance

    • Demonstrated ability to safely troubleshoot complex mechanical equipment

      Source wording
      Demonstrated ability to safely troubleshoot complex mechanical equipment

    • Strong attention to detail with a focus on equipment reliability and regulatory compliance

      Source wording
      Strong attention to detail with a focus on equipment reliability and regulatory compliance

    • Physically capable of lifting up to 50 lbs (23 kg)

      Source wording
      Physically capable of lifting up to 50 lbs (23 kg)

    • Ability to perform physically demanding and repetitive maintenance activities

      Source wording
      Ability to perform physically demanding and repetitive maintenance activities

    • Ability to manage competing priorities while maintaining a strong focus on safety and equipment reliability

      Source wording
      Ability to manage competing priorities while maintaining a strong focus on safety and equipment reliability

    • Certifications • Red Seal Journeyperson Millwright - Industrial Mechanic - Certification (433A) or relevant experience

      Source wording
      Certifications • Red Seal Journeyperson Millwright - Industrial Mechanic - Certification (433A) or relevant experience

    • Ontario Common Core or equivalent mining experience/training from another Canadian province

      Source wording
      Ontario Common Core or equivalent mining experience/training from another Canadian province

    • Fall Protection Certification

      Source wording
      Fall Protection Certification

    • Confined Space Certification

      Source wording
      Confined Space Certification

    • WHMIS

      Source wording
      WHMIS

    Requirement coverage

    Only part of this posting could be checked. Check the source for the full terms.

      OPEN JOB POSTING August 2026 Hoist Mechanic / Hoist Milwright  Location: True North Mine, Bissett, Manitoba (Camp-Based)  Job Type: Full-Time  Company: 1911 Gold Corporation  Schedule: 14 Days On / 14 Days Off (Days & Nights)  Work Location Note: This position is based at the True North Mine site. Camp accommodations and meals are provided during scheduled work rotations. Position Overview 1911 Gold Corporation is seeking an experienced and safety-focused Hoist Mechanic / Hoist Millwright to support the inspection, maintenance, repair, testing, and reliability of mine hoisting systems and associated mechanical equipment at the True North Mine in Bissett, Manitoba.

      The Hoist Mechanic / Hoist Millwright is responsible for ensuring hoist plants, conveyances, ropes, braking systems, safety devices, and supporting mechanical equipment are maintained in accordance with Manitoba's Operation of Mines Regulation (M.R. [phone]), applicable standards, manufacturer requirements, engineering specifications, and company procedures. This position plays a critical role in maintaining the safe and reliable operation of shaft hoisting systems, safeguarding personnel and infrastructure, and supporting efficient underground mining operations. The successful candidate will work closely with Hoist Operators, Maintenance, Electrical, Engineering, Operations, and contractors to maximize equipment reliability and minimize operational downtime.

      Key Responsibilities Hoist Maintenance & Operations • Inspect, maintain, troubleshoot, repair, and overhaul mine hoists and associated mechanical systems. • Perform preventative, predictive, and corrective maintenance on: Drum and friction hoists Braking systems Clutches and drives Gearboxes and couplings Headframes and sheaves Conveyances, including cages, skips, and counterweights Loading and dumping systems Rope attachments and guides Hydraulic and pneumatic systems • Complete scheduled inspections in accordance with site maintenance standards and regulatory requirements. • Assist with annual hoist shutdowns, major rebuilds, equipment overhauls, and shaft rehabilitation projects. • Perform operational equipment checks and identify developing mechanical issues before equipment failure occurs. Compressed Air & Pumping Systems • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations. • Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls. • Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Regulatory Compliance & Documentation • Inspect, maintain, troubleshoot, repair, and overhaul surface compressed air systems supporting mine and mill operations. • Perform preventative and corrective maintenance on: Rotary screw air compressors Reciprocating air compressors Air receivers and associated piping Dryer systems and filtration equipment Compressor cooling systems Air distribution networks and pressure-control systems • Conduct routine inspections of compressor performance, including temperatures, pressures, oil systems, vibration levels, and safety controls. • Inspect, maintain, and repair pneumatic pumping systems used for mine dewatering and process applications, including: Double diaphragm pumps Grouting pumps Sludge and sump pumps Air-operated transfer pumps Pump controls and associated piping systems Safety Systems • Inspect and test hoist braking systems, limit switches, overwind protection devices, emergency-stop systems, safety interlocks, and other critical safeguards. • Verify the proper operation of shaft signalling equipment and mechanical safety systems. • Assist with equipment failure investigations and root-cause analyses involving hoisting and related mechanical systems. • Follow all lockout/tagout and energy-isolation requirements during maintenance activities. • Participate in safety meetings, risk assessments, Job Hazard Analyses, and other site safety initiatives. Preventative Maintenance & Reliability • Follow and support established preventative and predictive maintenance programs. • Monitor equipment condition and identify developing failures before breakdowns occur. • Participate in equipment reliability and continuous-improvement initiatives. • Recommend equipment upgrades and maintenance improvements to increase reliability and minimize operational downtime. • Support equipment lifecycle and replacement planning. • Assist with the development, review, and revision of preventative maintenance programs and procedures.

      Required Experience & Skill Set • Minimum 5 years of industrial maintenance experience. • Journeyperson Industrial Mechanic (Millwright), Interprovincial Red Seal Industrial Mechanic (Millwright), or an equivalent recognized mechanical trade qualification acceptable to 1911 Gold Corporation. • Previous experience maintaining mine hoists or other critical lifting systems is preferred. • Previous underground mining experience is considered a strong asset. • Strong experience with hydraulic, pneumatic, and rotating equipment systems. • Strong mechanical troubleshooting and diagnostic capabilities. • Experience with precision alignment, vibration management, bearings, gearboxes, and drivetrain maintenance. • Demonstrated ability to safely troubleshoot complex mechanical equipment. • Strong attention to detail with a focus on equipment reliability and regulatory compliance. • Effective verbal and written communication skills. • Ability to work independently and collaboratively in a fast-paced industrial environment. • Strong planning, organizational, analytical, and problem-solving skills. Job Conditions & Work Environment • Ability to work safely in an active industrial and underground mining environment. • Comfortable working at heights and in confined spaces. • Ability to climb ladders, headframes, and fixed-access systems. • Physically capable of lifting up to 50 lbs (23 kg). • Ability to perform physically demanding and repetitive maintenance activities. • Comfortable working indoors and outdoors in varying weather and environmental conditions. • Ability to work rotating shifts, including days and nights. • Ability to respond to emergency call-outs when required. • Ability to manage competing priorities while maintaining a strong focus on safety and equipment reliability. Certifications • Red Seal Journeyperson Millwright - Industrial Mechanic - Certification (433A) or relevant experience. • Ontario Common Core or equivalent mining experience/training from another Canadian province. • Fall Protection Certification. • Confined Space Certification. • Lockout/Tagout Training. • WHMIS. • First Aid/CPR considered an asset.

      Equity, Diversity & Inclusion 1911 Gold Corporation is committed to fostering an inclusive, respectful, and diverse workplace. Accommodations are available upon request throughout the recruitment process. Email resume and cover letter to: [email]