Skip to content

Worker guide

H2S Alive: 1-day course, 70% to pass, valid 3 years

Updated October 31, 2026

H2S Alive is an Energy Safety Canada course on working safely around hydrogen sulphide (H2S). The classroom course takes 1 day, and Energy Safety Canada's exam pass mark is 70%. When you pass, you get a certificate that is valid for three years.

Prices depend on the training provider. The table shows two providers' regular prices, before tax. Ask a provider near you for its current price.

Sources234

How much does H2S Alive cost?

Provider and coursePrice
iRescue Training, Newmarket, Ontario: 1-day classroom course[2][3]$279 plus HST[2]
Western Canada Fire & First Aid, Edmonton, Alberta: instructor-led, about 8 hours[4]$145 plus GST[4]

What happens on course day?

AI-generated illustration

The course mixes theory with hands-on practice. You learn to find and detect H2S, reduce the hazards, and respond to a release. At Energy Safety Canada, classes start at 8:00 a.m. sharp and can run past 4:30 p.m. Mountain Time. You must attend the whole course. If you miss any part, you cannot be certified.

iRescue Training requires 100% attendance, a skills demonstration and a passing exam grade. Survival Systems Training lists the course at eight hours. There, when you pass, you get a temporary certificate valid for 90 days, as well as the Energy Safety Canada certificate.

Sources1526

What do you need to take it?

You must be able to show that you can do these things:

  • Put on a mask and breathe supplied air.
  • Take part in rescue drags.
  • Put on and take off a breathing apparatus (SCBA).

Bring government-issued photo ID. You must be ready to take part in English, at least at CLB Level 3. Some providers set a minimum age of 16. You do not need to be clean-shaven, because the course does not need a full face seal. Great Plains College sells an optional quantitative fit test for a full or half mask after the course for $29.

Sources15427

Can you take H2S Alive online?

Not for your first certificate. Energy Safety Canada lists H2S Alive as a classroom course. Training provider WestPro Safety says Energy Safety Canada requires the full course in person, for breathing apparatus training. Energy Safety Canada also has an online Hydrogen Sulphide Awareness course. It is for workers who may visit a site with H2S but do not work in H2S areas. It does not replace H2S Alive. To renew a valid H2S Alive certificate, you can do the theory online and the skills assessment in person.

Sources18910

How long is H2S Alive valid, and how do you renew it?

Your certificate is valid for three years. Before it expires, you can renew it with the H2S Alive Blended Renewal:

  1. Ask a training provider in your area if it runs the skills assessment. The assessment has its own fee, which you pay to the provider. Western Canada Fire & First Aid in Edmonton charges $80 plus GST.

  2. Buy and open the online part from Energy Safety Canada. Great Plains College says to do this before your current certificate expires.

  3. Finish the online part within 90 days of registration, or you lose the fee.

  4. Do the in-person skills assessment. Western Canada Fire & First Aid describes the renewal as 3 hours of online theory and a 30-minute skills assessment.

  5. If you pass, you get a new certificate. If you fail, you must take the classroom course, and fees apply.

An expired certificate does not qualify for the blended renewal. Western Canada Fire & First Aid notes that registering does not extend your current expiry date.

Sources1101112134

Where can you do the renewal skills assessment?

  • Newfoundland and Labrador: Mount Pearl, Paradise and St. John's[3]
  • Prince Edward Island: Summerside[3]
  • Nova Scotia: Dartmouth and Sydney[3]
  • New Brunswick: no assessor on the list[3]
  • Quebec: no assessor on the list[3]
  • Ontario: Newmarket, Sarnia and Stoney Creek[3]
  • Manitoba: Brandon and Virden[3]
  • Saskatchewan: Coleville, Estevan, Gull Lake, Kindersley, Lampman, North Battleford, Prince Albert, Regina, Saskatoon, Swift Current and Weyburn[3]
  • Alberta: in many places, including Calgary, Edmonton, Fort McMurray, Grande Prairie, Lloydminster, Medicine Hat and Red Deer[3]
  • British Columbia: Dawson Creek, Fort Nelson, Fort St. John, Kelowna, Qualicum Beach and Surrey[3]
  • Yukon: no assessor on the list[3]
  • Northwest Territories: no assessor on the list[3]
  • Nunavut: no assessor on the list[3]

Who requires H2S Alive?

  • Energy Safety Canada says its certificates are accepted worldwide, but employers set the safety training each site needs[14]
  • Cenovus Energy's Western Canada HSE schedule sets rules for suppliers. Their workers who supervise or do work with or near sour materials must hold a valid Energy Safety Canada H2S Alive certificate. Suppliers whose tasks rarely take them into operating areas must take an H2S awareness course and always stay with an operator[15]
  • Keyera requires each field worker to hold current H2S Alive certification before arriving at Alberta work sites where H2S is present[16]
  • TC Energy's 2020 safety handbook lists H2S Alive or an equivalent among the training that may be required[17]
  • On Atlantic Canada offshore drilling and production installations, the industry training code requires an H2S Alive certificate[18]

In Alberta, the Occupational Health and Safety (OHS) Code requires a code of practice for hydrogen sulphide at some work sites. Alberta's 2010 bulletin says the code of practice should include worker training requirements.

Sources1920

What other tickets and courses count?

Training provider iRescue says first aid is no longer part of H2S Alive. If a site also asks for CSTS 2020, see the CSTS 2020 guide. TC Energy's 2020 handbook lists H2S Alive or an equivalent. On Atlantic offshore installations that are not drilling or production installations, the offshore code says other training that covers its course content may be acceptable. Ask the employer before you book a different course.

Sources21718

Why does the course matter?

AI-generated illustration

H2S smells like rotten eggs. You can smell it at very low levels, from 0.01 to 0.3 ppm. Above 100 ppm, it can deaden your sense of smell within a few minutes, so do not trust your nose. At 500 to 1,000 ppm, it can stop your breathing and kill you without rescue. It can collect in low-lying areas, especially confined spaces. CCOHS, the Canadian Centre for Occupational Health and Safety, lists the ACGIH exposure values as a 1 ppm time-weighted average and a 5 ppm short-term limit.

Sources2120

Is H2S Alive worth it?

AI-generated illustration

Yes, if you work or want to work at sites where H2S can be present. An employer can require it before you arrive on site, and the section on who requires H2S Alive gives examples. If you only visit H2S sites now and then, ask the employer if an awareness course is enough.

Sources169

Mistakes to avoid

Check these points before you book:

  • Do not let your certificate expire before you start the blended renewal. An expired certificate does not qualify.
  • Do not book the online awareness course when the job asks for H2S Alive. It does not replace H2S Alive.
  • Do not book without reading the provider's cancellation rule. The booking steps below give examples.
  • Do not forget your government-issued photo ID.
  • Do not register for the blended renewal before you find a provider that runs the skills assessment.

Sources101291

How do you book H2S Alive?

Follow these steps:

  1. Check which ticket the job asks for: H2S Alive or an awareness course.

  2. Pick a provider: Energy Safety Canada at its own locations, or an Authorized Training Provider near you.

  3. Read the cancellation rule before you pay. At Energy Safety Canada, less than five business days' notice costs 50% of the fee, at least $50. There, a late arrival who is turned away loses the full fee. WestPro Safety needs 24 hours' notice, and late arrivals lose the full fee.

  4. Bring government-issued photo ID on the day.

  5. Collect your certificate before you leave. It can take up to 5 business days to appear in your Energy Safety Canada account.

  6. Keep it safe. A replacement certificate costs $25 plus tax.

  7. If an employer wants to check your certificate, Energy Safety Canada gives it the status only with your permission.

Sources141225823

Questions and answers

Do you need to be clean-shaven for H2S Alive?

No. The course does not need a full face seal on the breathing apparatus.

Does H2S Alive include first aid?

Training provider iRescue says first aid is no longer part of H2S Alive.

Is a US H2S course accepted in Canada?

Ask the employer. Energy Safety Canada says employers set the safety training each site needs. TC Energy's 2020 handbook lists H2S Alive or an equivalent among training that may be required.

What happens if you fail the renewal skills assessment?

You must take the classroom course, and fees apply.

Is H2S Alive the same as H2S Awareness?

No. Energy Safety Canada's online Hydrogen Sulphide Awareness course is for workers who may visit a site with H2S. It does not replace H2S Alive.

How can an employer check your H2S Alive certificate?

Energy Safety Canada gives an employer your certificate status only if you authorize it.

Can you replace a lost H2S Alive certificate?

Yes. Energy Safety Canada replaces certificates for a fee.

Sources

  1. H2S Alive

    Energy Safety Canada. Retrieved October 30, 2026

  2. H2S Alive

    iRescue Training. Retrieved October 30, 2026

  3. List of Providers: H2S Blended Skill Assessor

    Energy Safety Canada. Retrieved October 30, 2026

  4. H2S Alive Training Edmonton

    Western Canada Fire & First Aid. Retrieved October 30, 2026

  5. Policies

    Energy Safety Canada. Retrieved October 30, 2026

  6. H2S Alive – Certified By Energy Safety Canada

    Survival Systems Training Limited. Retrieved October 30, 2026

  7. H2S ALIVE (ESC)

    Great Plains College. Retrieved October 30, 2026

  8. Energy Safety Canada - H2S Alive – Edmonton

    WestPro Safety. Retrieved October 30, 2026

  9. Hydrogen Sulphide Awareness

    Energy Safety Canada. Retrieved October 30, 2026

  10. H2S Alive Blended Renewal

    Energy Safety Canada. Retrieved October 30, 2026

  11. ESC - H2S Alive Blended Assessment – Edmonton

    WestPro Safety. Retrieved October 30, 2026

  12. H2S Alive Blended Renewal (ESC)

    Great Plains College. Retrieved October 30, 2026

  13. ESC H2S Alive Blended Renewal

    Western Canada Fire & First Aid. Retrieved October 30, 2026

  14. FAQs

    Energy Safety Canada. Retrieved October 30, 2026

  15. Western Canada HSE Schedule

    Cenovus Energy. Retrieved October 30, 2026

  16. TC Energy Safety Handbook, 2020 Edition

    TC Energy. Retrieved October 30, 2026

  17. Code of Practice for the Training and Qualifications of Offshore Personnel (September 2026)

    Atlantic Canada Offshore Petroleum Training and Qualifications Committee. Retrieved October 30, 2026

  18. OHS Code Schedule 1: Chemical Substances

    Government of Alberta. Retrieved October 30, 2026

  19. CH029: Hydrogen Sulphide at the Work Site

    Government of Alberta. Retrieved October 30, 2026

  20. OSH Answers: Hydrogen Sulfide

    Canadian Centre for Occupational Health and Safety (CCOHS). Retrieved October 30, 2026

  21. Find an ATP

    Energy Safety Canada. Retrieved October 30, 2026

  22. Certificates

    Energy Safety Canada. Retrieved October 30, 2026

Find work that fits your trade.

Your signup records your interest in trades work. Join the waitlist for access updates.

Join the waitlist