Skip to content

Wages

Sheet Metal Worker Pay in Canada (2026)

Updated November 12, 2026

In Canada, the median wage for Sheet metal workers (NOC 72102) is $34.07 an hour (Job Bank, data from 2023 to 2024, published November 19, 2025). Pay depends on the province and the region. The tables below give the low, median and high wage for each province, territory and region with a Job Bank figure.

What do sheet metal workers earn in Canada?

AI-generated illustration

The first table gives Job Bank's wages for sheet metal workers across Canada. The group covers workers who fabricate, assemble, install and repair sheet metal products, and it includes apprentices. Boilermakers, ironworkers, structural metal and platework fabricators, and aircraft sheet metal technicians are in other groups, so these figures do not include them. Half of the workers in a group earn more than the median, and half earn less.

Sources19

Sheet metal worker wages across Canada

PlaceLowMedianHigh
CanadaSheet metal workers (NOC 72102) · Hourly · Data from 2023 to 2024 · Dated November 19, 2025$22.70[1]$34.07[1]$45.95[1]

Sheet metal worker wages in every province and territory

Sheet metal workers (NOC 72102) · Hourly · Data from 2023 to 2024 · Dated November 19, 2025

PlaceLowMedianHigh
Newfoundland and Labrador$24.50[1]$34.75[1]$45.25[1]
Prince Edward IslandNo published figureNo published figureNo published figure
Nova Scotia$19.50[1]$29.00[1]$38.32[1]
New Brunswick$20.00[1]$27.30[1]$35.73[1]
Quebec$25.50[1]$40.00[1]$44.79[1]
Ontario$22.94[1]$35.00[1]$48.17[1]
Manitoba$20.00[1]$29.50[1]$42.00[1]
Saskatchewan$19.74[1]$29.50[1]$44.66[1]
Alberta$20.00[1]$30.00[1]$42.00[1]
British Columbia$23.14[1]$32.16[1]$45.60[1]
YukonNo published figureNo published figureNo published figure
Northwest TerritoriesNo published figureNo published figureNo published figure
NunavutNo published figureNo published figureNo published figure

Which provinces pay sheet metal workers the most?

In the province and territory table, Quebec has the highest median, and New Brunswick has the lowest.

Sources1

Pay in cities and regions

The table below lists every region with a Job Bank figure. Find the region where the job is before you compare an offer.

Sheet metal worker wages by region

Sheet metal workers (NOC 72102) · Hourly · Data from 2023 to 2024 · Dated November 19, 2025

PlaceLowMedianHigh
Avalon Peninsula, Newfoundland and Labrador$24.00[1]$34.75[1]$44.52[1]
Cape Breton, Nova Scotia$20.76[1]$32.50[1]$38.00[1]
Halifax, Nova Scotia$19.50[1]$28.08[1]$38.10[1]
Campbellton–Miramichi, New Brunswick$22.00[1]$27.88[1]$34.00[1]
Moncton–Richibucto, New Brunswick$18.75[1]$26.00[1]$35.00[1]
Bas-Saint-Laurent, Quebec$23.00[1]$38.00[1]$44.79[1]
Capitale-Nationale, Quebec$25.20[1]$43.00[1]$45.00[1]
Centre-du-Québec, Quebec$25.81[1]$42.00[1]$44.79[1]
Chaudière-Appalaches, Quebec$25.50[1]$40.00[1]$44.79[1]
Estrie, Quebec$25.00[1]$35.00[1]$44.79[1]
Lanaudière, Quebec$25.88[1]$41.00[1]$44.79[1]
Laurentides, Quebec$26.00[1]$41.00[1]$45.00[1]
Laval, Quebec$25.81[1]$35.70[1]$44.79[1]
Mauricie, Quebec$25.00[1]$42.00[1]$44.79[1]
Montérégie, Quebec$26.00[1]$40.76[1]$45.00[1]
Montréal, Quebec$24.90[1]$35.00[1]$44.00[1]
Outaouais, Quebec$26.00[1]$39.00[1]$47.00[1]
Saguenay–Lac-Saint-Jean, Quebec$24.00[1]$42.00[1]$45.00[1]
Hamilton–Niagara Peninsula, Ontario$22.50[1]$35.00[1]$48.27[1]
Kingston–Pembroke, Ontario$20.00[1]$35.00[1]$48.51[1]
Kitchener–Waterloo–Barrie, Ontario$23.27[1]$36.10[1]$48.34[1]
London, Ontario$20.83[1]$30.00[1]$47.77[1]
Muskoka–Kawarthas, Ontario$24.00[1]$38.03[1]$50.00[1]
Northeast, Ontario$23.00[1]$34.67[1]$48.00[1]
Northwest, Ontario$24.17[1]$40.25[1]$49.76[1]
Ottawa, Ontario$22.00[1]$33.39[1]$47.74[1]
Stratford–Bruce Peninsula, Ontario$21.55[1]$30.00[1]$43.00[1]
Toronto, Ontario$24.20[1]$35.40[1]$48.17[1]
Windsor–Sarnia, Ontario$21.06[1]$31.05[1]$48.00[1]
Southeast, Manitoba$20.70[1]$28.17[1]$41.10[1]
Winnipeg, Manitoba$19.62[1]$28.33[1]$41.70[1]
Regina–Moose Mountain, Saskatchewan$19.51[1]$27.00[1]$43.00[1]
Saskatoon–Biggar, Saskatchewan$20.00[1]$30.00[1]$44.66[1]
Calgary, Alberta$20.00[1]$29.70[1]$40.00[1]
Edmonton, Alberta$20.00[1]$30.75[1]$45.00[1]
Lower Mainland, British Columbia$22.98[1]$32.17[1]$45.95[1]
Thompson–Okanagan, British Columbia$23.00[1]$32.00[1]$43.00[1]
Vancouver Island and Coast, British Columbia$24.00[1]$30.00[1]$42.00[1]

How much do apprentice sheet metal workers earn?

AI-generated illustration

Some provinces set a minimum wage for apprentices. Nova Scotia and Saskatchewan set it as a share of the journeyperson wage. Manitoba sets it as a share of a journeyperson reference rate.

Sources23104

Apprentice wage schedules by province

  • Nova Scotia sets an apprentice's minimum wage at 50%, 55%, 60%, 65%, 75%, 80%, 85% and 90% of the journeyperson wage in the same place of employment, one share for each 900 hours over 7,200 hours. The wage cannot be lower than the general minimum wage. An employer does not have to raise the wage until the apprentice completes the technical training for the level.[2][3]
  • Manitoba's apprenticeship regulation bases a sheet metal worker apprentice's minimum hourly wage during practical experience on the reference wage rate. The shares for levels 1 to 4 are 50%, 65%, 75% and 85%. A payment agreement or enactment that is more favourable to the apprentice applies instead. The wage can never be less than 110%, 120%, 130% and 140% of the provincial minimum wage for those levels.[10]
  • The reference wage rate is the minimum wage that Manitoba's Construction Industry Minimum Wage Regulation sets for a journeyperson sheet metal worker. Where The Construction Industry Wages Act sets no journeyperson rate, it is the prevailing hourly wage of a journeyperson on the same contract or job.[10]
  • Saskatchewan's 2020 table, an unofficial consolidation, lists 40%, 47%, 54%, 61%, 68%, 75%, 82% and 90% for sheet metal worker apprentices, one share for each 900 hours over 7,200 hours. Each share is a percentage of the hourly rate of a newly qualified journeyperson in the same establishment. These shares are minimums. Minimum wage requirements also apply, and a collective agreement with higher apprentice rates applies instead.[4]

How do fair-wage rates compare with the median?

Some public contracts, and one provincial law, set a rate for each trade. The list below gives three of them for sheet metal workers. They are the City of Toronto fair wage schedule for industrial, commercial and institutional (ICI) work, Manitoba's ICI minimum wage schedule and Burnaby's fair wage schedule. Burnaby's schedule follows the standard union agreement rates in British Columbia. To compare a Toronto or Burnaby rate with the Job Bank median, find the Toronto or Lower Mainland row in the region table. The schedule rates are for one classification, and the Job Bank median covers everyone in the occupation group. The schedule rates are for 2026 and 2027, and the medians cover earlier years.

Sources5167

Published fair-wage and minimum rates for sheet metal workers

  • The City of Toronto fair wage schedule for ICI work lists $50.68 an hour, plus 10% vacation and holiday pay and $16.57 in fringe benefits, for a sheet metal worker from May 3, 2026.[5]
  • From May 2, 2027, the Toronto ICI rate for a sheet metal worker rises to $52.25 an hour, plus 10% vacation and holiday pay and $16.57 in fringe benefits.[5]
  • Manitoba's ICI construction minimum wage schedule lists a wage rate of $45.44 for a journeyperson sheet metal worker from May 1, 2026 to April 30, 2027, and $46.35 from May 1, 2027.[6]
  • Manitoba's ICI minimum wage rates have been the same wherever the project is in Manitoba since June 1, 2009.[6]
  • Burnaby's fair wage schedule lists $52.00 an hour plus $15.09 in remuneration, a total of $67.09, for a journeyperson sheet metal worker in the commercial and institutional sectors. It follows the CLRA summary of standard union agreement rates for June 2026.[7]

How is overtime paid on public contracts?

On City of Toronto ICI contracts, hours past the weekly limit are paid at time and a half. The schedule lists a 40-hour week for sheet metal workers. On Manitoba ICI construction, standard hours are 10 a day and 40 a week, and extra hours are paid at the overtime rate. For other jobs, ask the employer how it pays overtime before you accept.

Sources56

Before you move for sheet metal work

AI-generated illustration

Check these points before you accept a job in another city or province.

  • Compare the regional median, not only the provincial one. The region table lists each region under its province.
  • Ask whether the job is on a public contract with a fair wage rate, such as a City of Toronto ICI contract. The rate list above gives the rates.
  • Ask whether a quoted rate is base pay or a total package. Toronto adds vacation pay and fringe benefits, and Burnaby adds remuneration.
  • Check the certification rules in the new province. Sheet metal worker is a compulsory certified trade in Nova Scotia and a voluntary trade in Manitoba.
  • If you are an apprentice, check the wage schedule in the new province. The apprentice list above gives three schedules.

Sources5728

How to read these figures

The high wage is not a maximum.

Questions and answers

How much does a sheet metal worker make in Ontario?

Ontario's low, median and high wages are in the province and territory table. For Toronto, Ottawa or another Ontario city, find its region under Ontario in the region table.

How much does a sheet metal worker make in Alberta?

Alberta's wages are in the province and territory table. For Calgary or Edmonton, find its region under Alberta in the region table.

How much does a sheet metal worker make in British Columbia?

British Columbia's wages are in the province and territory table. For Vancouver or another British Columbia city, find its region under British Columbia in the region table. Burnaby's fair wage rate is in the rate list.

How do I estimate my pay as an apprentice?

Find your province in the apprentice wage schedules. Each schedule sets a share of a base wage that the list names, such as a journeyperson rate. Multiply that base by the share for your level or hour block. The list says when a higher rate applies.

Do union sheet metal workers earn more?

Burnaby's fair wage schedule follows standard union agreement rates in British Columbia. The rate list gives its rate for a sheet metal worker. Compare it with the Lower Mainland row in the region table.

Sources

  1. Job Bank open wage data (Wages dataset), 2025-11-19

    Employment and Social Development Canada. Retrieved October 31, 2026

  2. Sheet Metal Worker Trade Regulations, N.S. Reg. 193/2016

    Province of Nova Scotia, Office of the Registrar of Regulations. Retrieved October 31, 2026

  3. Apprenticeship and Trades Qualifications Act General Regulations (Nova Scotia)

    Province of Nova Scotia, Office of the Registrar of Regulations. Retrieved November 11, 2026

  4. SATCC wage rates table for apprentices (2020)

    Saskatchewan Apprenticeship and Trade Certification Commission (SATCC). Retrieved October 31, 2026

  5. Fair Wage Schedule 2025-2028, Industrial, Commercial and Institutional (I.C.I.) Work

    City of Toronto, Fair Wage Office. Retrieved October 31, 2026

  6. Manitoba ICI Construction Sector Minimum Wage Schedules

    Government of Manitoba, Employment Standards. Retrieved October 31, 2026

  7. Manitoba Designated Trades

    Apprenticeship Manitoba, Government of Manitoba. Retrieved October 31, 2026

  8. National Occupational Classification (NOC) 2021 Version 1.0, unit group 72102 – Sheet metal workers

    Employment and Social Development Canada. Retrieved November 11, 2026

Find work that fits your trade.

Your signup records your interest in trades work. Join the waitlist for access updates.

Join the waitlist