Skip to content
Join the waitlist

Welder Resume Guide for Canadian Shop and Field Work

Write a welder resume that shows your welding processes, materials, positions, and current qualifications. Includes examples for shop and field work.

See resume examplesJoin the waitlist

List the welding processes, materials, and positions you have worked with. Include your current qualifications and describe the projects where you used them. This guide covers work history and resume examples for Canadian fabrication, structural, pipeline, and shutdown work.

Welder resume examples

Name the process, position, material, and result. Replace each example with your own work.

  • Welded mainline pipe on Coastal GasLink Section 7 spread (NPS 48, X70 pipe) — TIG root, FCAW fill/cap — passing CWB radiographic inspection on 47 of 48 joints; one repaired in field, accepted.

  • Held active CWB B-pressure tickets in SMAW 6G carbon and GTAW 6G stainless throughout 2023; passed Co-op Refinery Regina re-qualification on first attempt.

  • FCAW production welding (uphill, vertical, overhead) on modular pipe rack skids at Cessco Fabrication & Welding, Edmonton; consistent 92%+ first-pass acceptance over 18 months.

  • Stovepipe SMAW (downhill) on mainline tie-ins, TC Energy NGTL System expansions, 2022 season; 26 critical-service tie-ins completed, zero rejects.

  • TIG-welded small-bore stainless instrumentation lines (1/2" to 2", Sch 10S) at LNG Canada module fabrication, Kitimat; orbital TIG on tie-ins.

  • Wire welder (GMAW pulse) on structural shop fabrication of mining haul-truck frames; passed CSA W47.1 Division 1 qualification.

Notice the pattern: process, position, material, project, outcome. That's the resume voice for Canadian welding work.

What to include on a Canadian welder resume

Lead with your processes, positions, materials, qualifications, and project settings:

  1. Red Seal welder ticket

    (or provincial journeyperson).

  2. CWB qualifications

    current, by process, position, material, and thickness.

  3. B-pressure (CWB pressure welder) status

    if you've got it, lead with it.

  4. Recent project list

    pipeline spread, fab shop, shutdown, structural site. Operator and contractor names matter.

  5. Safety and site tickets

    CSTS-2020, H2S Alive, Fall Protection, Confined Space, Hot Work, WHMIS, First Aid.

Put your current tickets near the top of page one. Add the process, position, material, and project setting for each qualification.

The Red Seal trail and provincial codes

The Welder trade is on the Red Seal Interprovincial Standard. Codes and classifications vary by province:

Ontario
trade code 456A, classified as voluntary (non-compulsory). You can weld in Ontario without a Certificate of Qualification, but ICI contractors, shipyards, and pressure shops often require it.
Alberta
journeyperson Welder through AIT. The trade profile is Red Seal-designated; oil and gas employers may require certification even where the legal gate is employer- or site-specific.
British Columbia
Welder certification is administered through SkilledTradesBC. Welder is not one of BC's current seven Skilled Trades Certification compulsory trades; verify employer/site requirements.
Saskatchewan
Welder through SATCC. Saskatchewan's compulsory list does not include welder, so treat certification as valuable but not a compulsory-trade eligibility claim.
Quebec
Soudeur-monteur under CCQ construction-industry competency certificates. Red Seal endorsement is used for interprovincial mobility where applicable.

Source-backed regulatory facts

The Red Seal endorsement is the cross-Canada credential. It's separate from your CWB tickets, which are job-specific welding procedure qualifications. Both matter, and they live in different sections of the resume. The Red Seal goes in your headline. The CWB tickets get their own table.

"Journeyperson" is the standard term across Canada. "Journeyman" is still common in postings and conversation. Use whichever the employer uses.

CWB tickets and B-pressure

The CWB (Canadian Welding Bureau) administers the welder qualification system in Canada. A CWB ticket isn't a single thing — it's a matrix of process × position × material × thickness × backing. A welder may carry a dozen valid tickets at any time. List the live ones with their expiry status. A complete welder ticket list on a resume should include:

  • CWB structural qualifications

    process (SMAW, FCAW, GMAW, GTAW), position (1G/2G/3G/4G for plate, 1G–6G for pipe), material (CSA W47.1 carbon steel, W47.2 aluminum, W59 stainless), thickness range.

  • CWB pressure (B-pressure)

    the CWB-administered pressure welder qualification. If you carry B-pressure, name it with the process, position, material, and work setting.

  • CSA W178.2 inspector certification

    if you're cross-trained as Level 1, 2, or 3 inspector.

  • CSTS-2020

    national construction site safety orientation.

  • H2S Alive (Energy Safety Canada)

    required for almost every oil and gas job site.

  • Fall Protection / Working at Heights

    Ontario MOL-approved Working at Heights for elevated structural work; provincial Fall Protection elsewhere.

  • Confined Space Entry

    for vessel and tank work.

  • Hot Work / Fire Watch

    common on operating plants.

  • WHMIS 2015, Standard First Aid, CPR-C.

  • OSSA BSO

    for Alberta oil sands sites.

If you've got specialty exposure — TIG root on small-bore stainless, FCAW production on heavy-wall pipe, automatic orbital, hardfacing, MIG-pulse on aluminum — call it out by name and process.

Where welders work in Canada

LNG and natural gas pipeline

LNG Canada in Kitimat and Coastal GasLink running from northeastern BC to the coast have been the largest welding-intensive projects in the country. Pipeline welders running mainline construction, tie-ins, and fabrication on spreads have been pulled from every province. The work rewards welders who can run mainline mechanised welding (CRC-Evans, RMS-style), manual stovepipe (uphill SMAW), or TIG root with FCAW fill/cap on cross-country pipe. List the spread, the section number if you have it, and the contractor — Banister, Macro, Michels, Surerus, Pe Ben.

Structural and modular fabrication

Fab shops in Edmonton, Nisku, Leduc, Sherwood Park, and the BC Lower Mainland produce pre-fabricated pipe spools, structural skids, and modules for site assembly. If you have CSA W47.1 carbon steel structural or FCAW production experience, name the work and setting.

Refinery, petrochem, and shutdown work

Suncor, CNRL, Imperial, Syncrude, Co-op Refinery in Regina, Irving Refining in Saint John, and petrochemical sites in Sarnia and around Edmonton run refinery and plant turnarounds. B-pressure tickets, stainless TIG, alloy work, and dissimilar-metal welding can apply. If you've welded on a heat exchanger bundle or a fired-heater tube, name it.

Shipbuilding and heavy structural

Examples include Seaspan in North Vancouver, Irving Shipbuilding in Halifax, and Davie in Lévis, Quebec. If you have shipyard or hull work, name the process, material, position, and project.

Pipefitter crossover

Some Canadian welders work across welder and pipefitter-welder roles, particularly on industrial maintenance and shutdown work. If you can lay out, cut, prep, fit, and weld your own joints, name it. Add Steamfitter/Pipefitter 307A (Ontario) or an equivalent when you hold it.

Find welding work that fits

Werko monitors new welding jobs against your trade, experience, and work preferences. Review a match and give Werko permission to apply. Werko fills out the forms, sends the application, and keeps a record.

Resume import is optional. If you use it, you review the details before they become part of your profile. Join the waitlist for access updates.

Join the waitlist for Werko access updates.

Join the waitlist

Welder resume questions

What's the difference between a Red Seal welder and a CWB-qualified welder?

The Red Seal is your trade certification — you've completed an apprenticeship, passed the Interprovincial Standards Examination, and you're a journeyperson welder recognised across Canada. CWB qualifications are job-specific welding procedure tests administered by the Canadian Welding Bureau — they prove you can weld a specific process in a specific position on a specific material. Most professional welders hold both. The Red Seal opens doors. The CWB tickets get you on the bid.

Do I need B-pressure to work on pipelines?

For pipeline mainline construction, no — B-pressure (CWB pressure welder qualification) is a separate category aimed at pressure-retaining welds on piping in regulated systems like refineries and petrochemical plants. Pipeline welders typically qualify under CSA Z662 and the contractor's specific procedures. List the qualifications and procedures you hold for the work you want.

How do I list CWB tickets on a resume?

Use a table or clearly labelled block. Include process (SMAW / FCAW / GMAW / GTAW), position (1G–6G), material (carbon, stainless, aluminum), thickness range, and current or expired status.

Is welding compulsory certification in Ontario?

The source-backed rows above carry the current Ontario classification for Welder code 456A. In practice, ICI work, shipyards, pressure shops, and most union work still expect a journeyperson credential or equivalent documented qualification.

What's the difference between LNG Canada and Coastal GasLink for welders?

Coastal GasLink is the upstream pipeline — roughly 670 km of mainline pipe from northeastern BC to the Kitimat LNG facility. The work has been pipeline-welder-heavy: mainline production welding, tie-ins, river crossings. LNG Canada is the liquefaction and export terminal in Kitimat — the work there has been module fabrication, plant assembly, stainless and alloy pipe welding, and pressure piping. Different welds, often different welders.

Should I list every welding test I've ever passed?

List current, valid CWB tickets in detail. Put expired tickets on a separate previous-qualifications line when they add useful context. Do not pad the list.

Related searches

More trade resume guides